Company news_News_Wenzhou Longxin Metal Products Technology Co., Ltd.

中文 | EN

Search

Confirm

Cancel

中文

新闻banner

09-13 

Congratulations on the official launch of the company’s new website

The high-pressure safety valve is a safety protection valve, and its opening and closing parts are normally closed under the action of external force. It is divided according to the structural form, which is divided into plumb type, lever type, spring type and pilot type; according to the structure of the valve body, it can be divided into two types: closed type and non-closed type. The following are the matters needing attention when installing the high pressure safety valve: 1. For boilers with a rated evaporation capacity greater than 0.5t/h, install at least two safety valves; for boilers with a rated evaporation capacity less than or equal to 0.5t/h, install at least one safety valve; for boilers with a rated steam pressure less than or equal to 3.82MPa For boilers, the safety valve throat diameter should not be less than 25mm; for boilers with a rated steam pressure greater than 3.82MPa, the safety valve throat diameter should not be less than 20mm.

09-13 

Congratulations on the official launch of the company’s new website

Our company is a high-paying technology enterprise integrating professional casting, production and sales. Located in Binhai, Wenzhou Economic and Technological Development Zone, Zhejiang Province.

09-13 

Installing a high pressure safety valve is not an easy task, are you ready?

The high-pressure safety valve is a safety protection valve, and its opening and closing parts are normally closed under the action of external force. It is divided according to the structural form, which is divided into plumb type, lever type, spring type and pilot type; according to the structure of the valve body, it can be divided into two types: closed type and non-closed type. The following are the matters needing attention when installing the high pressure safety valve: 1. For boilers with a rated evaporation capacity greater than 0.5t/h, install at least two safety valves; for boilers with a rated evaporation capacity less than or equal to 0.5t/h, install at least one safety valve; for boilers with a rated steam pressure less than or equal to 3.82MPa For boilers, the safety valve throat diameter should not be less than 25mm; for boilers with a rated steam pressure greater than 3.82MPa, the safety valve throat diameter should not be less than 20mm.

Online consultation

QQ

1739212281

Phone

158 6808 6988

WeChat

Scan it
Add WeChat

TOP